今天去买了个,说安装需要40块还要预约。。有安全证书什么的???必须的吗这安全证书???老公想自己安装
评论
据说很难按，但不知道是不是一定要专业人士来安，等答案~~
评论
自己装就行
评论
我们都自己装
评论
不用！但是你老公搞不定的话，还是出钱装省事
评论
我自己装的，挺简单的
评论
我家第一次是专业的安装的，然后旁边观察怎么把座位固定紧，后面是自己装的了
评论
小孩子的安全座椅吗？不都是自己装的吗？
评论
我们找人装的，问Kogarah council要的voucher. 免费安装。
评论
找人装的，八十。
评论
自己装的
评论
自己装的
评论
nrma的普通会员40今天刚搜的
评论
不用，自己就行
评论
不用，自己就行
评论
大部分Council 不安装，voucher只是check和提意见的。自己装seatbelt没有isofix的车，要买seatbelt locking clip 才能不移动那个儿童椅
评论
没明白 那个儿童座椅吗? 不是非常简单吗? 放上去 把带子和汽车后部的挂钩一套就可以了啊 调整好带子长度到刚好就可以
评论
我们在baby bunting买的椅子，通过他们找人装半价20刀，其实就是教你怎么装而已。一对一，讲的很清楚
评论
自己装就行
评论
我们第一次找人装的。那时RTA上有个文件，上面有那些有资质的人的名单。然后看他怎么装，后来都是自己装的。不过我老公说，那个老头固定椅子的时候，拉的非常非常紧，说是为了安全。
评论
在家自己装的
评论
我们自己装
评论
这东西很难装吗？就一个钩子和安全带的事。
评论
Baby seat installation raises alarm bells for many new parents. While it's important to fit your seat correctly, it doesn’t have to be difficult to properly install your baby car seat. Here are some common mistakes you should be aware of before fitting a baby car seat:
Choosing the wrong size seat for your child's needs
The first step to ensuring a properly fitted baby car seat is choosing the right size for your child. This means selecting a seat that is appropriate for your child’s age and height and that conforms to Australian safety standards. You should follow the national safety road laws and manufacturer’s instructions on which seat to use and keep using the car seat for as long as possible as the safest transport option. A common mistake parents make is progressing to the next type of restraint based on age rather than height. Size of a child can vary and not all 4 years olds are the same size. Children should fit within the shoulder height marker advice for the specific model of child restraint they are using.
Choosing an unsafe position for the car seat
The safest placement of a baby car seat is on the rear seat in the center position, as it protects your child in the event of a side-on collision. You should always install the car seat where there is an appropriate anchor point and according to the instructions in your vehicle’s owners’ manual.
Incorrectly installing
With so many belts and straps, ensuring correct baby seat installation can be confusing. You should always follow the manufacturer’s instructions on how to fasten straps, making sure the car seat is secured tightly to your vehicle with no more than a couple of centimetres movement from back to front or side to side. If you do not feel confident installing the car seat yourself, you can consult a professional baby car seat fitting service.
Installing the baby seat at an unsafe angle
A properly installed infant carrier or rear facing car seat will keep your baby's head positioned comfortably on the back of the car seat. The preferred angle of a rear facing car seat base is 10-15°, for vehicle’s with a flatter car seat you can pack firmly rolled up towels on the underside of the base to achieve the desired angle. Some car seats, like our Unity Infant Carrier include levelling indicator lines that allow you to gauge the correct angle.
https://www.britax.com.au/tips-a ... ng-a-baby-car-seat/
评论
挺简单的，自己装的
评论
我家的是自己装
评论
因为买的时候。店家一直在那说专业的安装之类的。还以为必需的呢。原来大多都是自己装的啊。
评论
不自己弄，每次换车，都出钱再装一次？
我家2娃的座椅，我自己拆装超过20次了。omg，我赚了1000大洋了。
评论
自己装，不会问下有小孩的，很简单。
澳洲中文论坛热点
- 悉尼部份城铁将封闭一年，华人区受影响！只能乘巴士（组图）
- 据《逐日电讯报》报导，从明年年中开始，因为从Bankstown和Sydenham的城铁将因Metro South West革新名目而
- 联邦政客们具有多少房产？
- 据本月早些时分报导，绿党副首领、参议员Mehreen Faruqi已获准在Port Macquarie联系其房产并建造三栋投资联